Print Page | Close Window

Chroming

Printed From: VHGMC
Category: The Main Forum Area
Forum Name: General talk and discussion
Forum Discription: Equipment, Shows, Problems, talk about them all here.
URL: http://www.tractorbox.co.uk/forum/forum_posts.asp?TID=8302
Printed Date: 21 Oct 2019 at 1:37am


Topic: Chroming
Posted By: sdarmstrong
Subject: Chroming
Date Posted: 09 Oct 2013 at 11:28pm
Im sure this has been covered before so please feel free to direct me to the right location if it has.
I have 3 fuel caps. the butterfly type , and the throtle lever off my Ransomes that I need to get re chromed. The only place in Ireland has a minimum charge of 100 euro for anything.....
Any body have any advice on chroming? Places in England that do a good job for reasonable money?
Or any general advice on dos and donts and what to look out for in general in relation to chroming....
Help much appreciated Big%20smile



Replies:
Posted By: series1gem
Date Posted: 10 Oct 2013 at 7:13am
For items like throttle levers I allways use chrome in a rattle can. If prepped properly it looks almost identical to the real thing.

-------------
If it isnt orange it isnt a rotavator


Posted By: Dieselhead
Date Posted: 10 Oct 2013 at 8:08pm
Chroming is very expensive.
 
I have been quoted 600 to get 2 motorbike wheels re doneShocked


-------------
Chris. I aint getting on no plane. Fool!


Posted By: sdarmstrong
Date Posted: 10 Oct 2013 at 11:14pm
Anyone used the DIY chroming kits ?


Posted By: will_haggle
Date Posted: 10 Oct 2013 at 11:33pm
I have some old DIY books and one is on electroplating, you don't want to know about the horrible stuff you need to do chroming!

-------------
6 months ago I couldn't even spell engineer - now I are one
Calne, North Wiltshire...


Posted By: will_haggle
Date Posted: 10 Oct 2013 at 11:37pm
You can buy kits, though....
http://www.classic-plating.co.uk/index_files/Page497.htm - Chrome plating kit

-------------
6 months ago I couldn't even spell engineer - now I are one
Calne, North Wiltshire...


Posted By: will_haggle
Date Posted: 10 Oct 2013 at 11:40pm
You really need copper first then nickel before a thin layer of chrome. That gives the best finish, the industry devised a way of putting chrome directly on the steel but it was rubbish....

-------------
6 months ago I couldn't even spell engineer - now I are one
Calne, North Wiltshire...


Posted By: wristpin
Date Posted: 11 Oct 2013 at 12:04am
I researched chroming a while back when restoring a classic scooter and it appeared that a number of local firms who used to offer a seasonably priced service were "forced out of the market" by health and safety issues but continued to offer the service by acting as agents for one or two bigger concerns.
Some came clean about it while others pretended that they still did chroming "in house" but the net result was two lots of profit being taken out of the one job plus transport costs etc. Plus the fact that one had no idea where one's, possibly irreplaceable, item was.
A re-chromed headlight rim cost me around 50 at the London Chroming Company and a re-silvered reflector for the same headlight 35 from a more local company, Central Engineering of Hythe. In both cases the results were excellent.  
In both cases new reproduction parts were available at far less cost but experience showed that they "didn't fit where they touched"!


Posted By: sdarmstrong
Date Posted: 11 Oct 2013 at 8:12am
Is "replica chrome" in these kits really good enough for the finish I want on my machine ?


Posted By: will_haggle
Date Posted: 11 Oct 2013 at 8:19am
I don't know how that works....

-------------
6 months ago I couldn't even spell engineer - now I are one
Calne, North Wiltshire...


Posted By: TITCH
Date Posted: 11 Oct 2013 at 8:55am
Search for Bob Cooper Chrome Plating on Google!!
These guys know & understand the importance of unique items!!
Also, wait for it, NEW laws coming in, EU or someone?? so regards chemicals & waste etc, this is only going to lead to fewer specialists about. FBHVC are covering this a bit at the moment.

Titch

-------------
Restorations Final Touch!


Posted By: Charlie
Date Posted: 11 Oct 2013 at 12:38pm
That is exactly why the VHGMC are members of FBHVC. We need someone to fight our case.

-------------
'Don't force it! Get a bigger hammer'


Posted By: series1gem
Date Posted: 11 Oct 2013 at 6:15pm
We have pistons in breakers ground undersize then chrome aliduim deposited on the serface then reground bak to std. 2-300 isn't an uncommon charge for the process.

-------------
If it isnt orange it isnt a rotavator


Posted By: TITCH
Date Posted: 11 Oct 2013 at 7:26pm
That'll be like a 'hard chrome' process Gareth, yes?
Like front forks on motorbike.. specialised stuff!

-------------
Restorations Final Touch!


Posted By: series1gem
Date Posted: 11 Oct 2013 at 7:51pm
Yes titch, supposed to be harder than the original steel.

-------------
If it isnt orange it isnt a rotavator


Posted By: sdarmstrong
Date Posted: 13 Oct 2013 at 1:56am
Can't decide which route to go down . Cost is obviously an issue , while quality cannot be measured in monetary terms. Is a super chrome finish overkill on this project ? Having said that I can see myself in the reflection of the paintwork , so ...... Help !!


Posted By: TITCH
Date Posted: 13 Oct 2013 at 7:28am
Decisions... decisions...
I would suggest that 'Buy it Right or Buy it Twice'

If you pay the right firm & relevant costs, then you will have the satisfaction of a quality finish...that will last!
I've worked with Metal Finishers a great deal and take the opinion that it's worth that initially outlay.. you'll look back in years to come... but that's me, it's personal preference IF you can be satisfied that your choice of supplier is the best one.

......
Titch

-------------
Restorations Final Touch!


Posted By: simar kid
Date Posted: 15 Oct 2013 at 9:26pm
Originally posted by series1gem

For items like throttle levers I allways use chrome in a rattle can. If prepped properly it looks almost identical to the real thing.
gareth I also have tried it just to see what the result was like,and strangly enough we had a chromed toilet seat and lid which was slightly worn away and I gave the whole unit a couple of coats and it has certainly given new life and sheen to it .having said this I must warn people that you have to hang onto the bath taps as its very slippy now.

-------------
Not sure whats wrong. i think we will let it develop



Print Page | Close Window