Print Page | Close Window

Barford clutch handle

Printed From: VHGMC
Category: The Machinery Forums
Forum Name: Pedestrian operated machines
Forum Discription: Mowers, rotavators and two wheeled machines
URL: http://www.tractorbox.co.uk/forum/forum_posts.asp?TID=8327
Printed Date: 25 Oct 2020 at 4:43pm


Topic: Barford clutch handle
Posted By: Shez
Subject: Barford clutch handle
Date Posted: 25 Oct 2013 at 10:32pm
As my first restoration project I have taken on a barford atom. It's fast turning into a money / time pit but hey...

It's complete apart from one minor detail - the clutch lever handle is missing. Anyone know where I can lay my hands on a spare? Failing that anywhere that I can borrow one to use as a pattern so I can have a new one cast?



Replies:
Posted By: Charlie
Date Posted: 26 Oct 2013 at 8:53am
Shez, I have checked my pile of bits look what I found this morning.



-------------
'Don't force it! Get a bigger hammer'


Posted By: Charlie
Date Posted: 26 Oct 2013 at 10:27am
Let me know if it is what you are looking for. Do you need just the handle or do you also need the operating rod?

-------------
'Don't force it! Get a bigger hammer'


Posted By: Shez
Date Posted: 27 Oct 2013 at 10:43pm
Thanks - I'll send you a pm to discuss.

Btw - check out this afternoon's success with the motor.

http://youtu.be/MUIOuDgoN8I

Now all I need to do is sort the idle speed and throttle set up - I may be back for more advice...




Print Page | Close Window